Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

174 Web Tools Administrator’s Guide
53-1000606-01
Setting up iSCSI Target Gateway Services
14
4. Select the IP Interface subtab and select the item on the tab.
5. Click Edit.
6. Click OK when you receive the Warning dialog box.
FIGURE 78 Edit IP Interface dialog box
7. Enter the subnet mask.
8. Enter the MTU size or accept the default MTU size and click OK.
NOTE
To change the IP address, delete the current IP address and re-create it. You will not be allowed
to create an additional IP address for this interface, as there can be only one IP address per
interface.
Configuring the IP route (optional)
1. Launch the iSCSI Target Gateway Admin module as described on page 171.
2. Select the iSCSI Port tab.
3. From the left pane, select the GbE port that will be used.
4. Select the IP Routes tab.
5. Click Add.
FIGURE 79 Add IP Route dialog box
6. Enter the IP address, subnet mask, and gateway IP address, and the metric.
7. Cli ck Add.