Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

Web Tools Administrator’s Guide 181
53-1000606-01
Setting up iSCSI Target Gateway Services
14
3. Select a DD in the left pane and click Edit.
4. Select virtual targets and use the buttons to add or remove them from the DD.
5. Click Next.
The opening screen with a list of virtual targets that you added to your DDs is displayed.
6. Click Next.
You can verify the virtual targets that you added to your DDs.
7. Cli ck Finish.
You can confirm the changes that you made before committing them.
About discovery domain sets (DDSet)
The iSCSI Target Gateway Admin module provides you with the flexibility to create discovery domain
sets (DDSet) that define the host target access. (This functionality is similar to Fibre Channel
zoning.) Use the Discovery Domains tab to view and manage access from iSCSI initiators to iSCSI
virtual targets.
The DD view displays all DDSets created and allows you to create, edit, enable, or disable a
discovery domain set. Select a DDSet from the left pane to view the contents of the set.
Discovery domains can be created but they do not have to be associated with a DDSet. However, a
DDSet cannot be created without having at least one discovery domain associated in it. Only
floating discovery domains are allowed.
NOTE
You can only rename a discovery domain or discovery domain set from the iSCSI Usability wizard.
Creating a discovery domain set
1. Open iSCSI Target Gateway Admin as described on page 171.
2. Select the Discovery Domains tab
3. Click Create DDSet
The Create DDSet wizard opens.