Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

Web Tools Administrator’s Guide 185
53-1000606-01
Setting up iSCSI Target Gateway Services
14
Use the Zone Admin module to create zoning or remove or add zone members to reflect your iSCSI
devices.
For more information about configuring zones, see “Configuring zoning” on page 96.
Creating an iSCSI Fibre Channel zone with no effective zone configuration
1. Open iSCSI Target Gateway Admin as described on page 171.
2. Click Create iSCSI Zone.
The following dialog box is displayed.
FIGURE 87 Create an iSCSI FC zone dialog box
3. Click Yes.
The Create iSCSI Zone wizard creates a zone called “ISCSI FC ZONE,” which will not be placed
into a defined configuration or automatically enabled.
4. Add the ISCSI FC ZONE into a configuration.
See “Creating zone configurations” on page 106.
Creating an iSCSI Fibre Channel zone with an effective zone configuration
1. Launch the iSCSI Target Gateway Admin module as described on page 171.
2. Click Create iSCSI Zone.
3. Click Yes.
4. Select a configuration in the dialog box.
• If you select a non-effective configuration, the iSCSI Fibre Channel zone will be added into
that configuration. The configuration will not be re-enabled and will remain in the defined
configuration until you enable it. You will need to add the iSCSI Fibre Channel zone to the
effective configuration at a later date or iSCSI target gateway will not work.
• If you select an effective configuration, the iSCSI Fibre Channel zone will be added into the
effective configuration and then the configuration will be re-enabled. This affects the
entire SAN; the zoning database needs to update itself and then replicate its changes into
the fabric.