Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

212 Web Tools Administrator’s Guide

53-1000606-01

Creating and maintaining user-defined accounts

FIGURE 100 Add User Account dialog box

4. Type the user name, which must begin with an alphabetic character. The name can be up to 40

characters long. It is case-sensitive and can contain alphabetic and numeric characters, the

dot (.) and the underscore ( _ ). It must be different from all other account names on the logical

switch.

5. Select a role from the drop-down menu. (See “Role-Based Access Control” on page 15 for

information about these roles.)

6. Optional: Type a description of the account.

7. Cli c k th e Enabled or Disabled radio button to enable or disable the account.

8. Type the password for the account. The password is not displayed when you enter it on the

command line.

Passwords can be from 8 through 40 characters long. They must begin with an alphabetic or

numeric character. They can include alphanumeric characters, the dot (.), and the underscore (

_ ). They are case-sensitive.

Passwords must also meet any additional password rules that have been set up. (See the

procedure “Setting the rules for passwords” on page 215 for more information.)

9. Retype the password in the Confirm Password field for confirmation.

10. Check the available Admin Domains that the user can access. Only Admin Domains that have

already been created and to which you have access are displayed.

If all the Admin Domains in the list are inactive then you cannot login to the switch.