Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

58 Web Tools Administrator’s Guide

53-1000606-01

Interoperability

FIGURE 31 Firmware Download tab for bladed switches

Interoperability

You can use Web Tools configure interoperability. When you turn on interoperability modes, Zone

DB is cleared.

When you turn on McDATA Fabric Mode:

• Switch View displays "McDATA Fabric" in the Interoperability Mode field.

• Brocade FOS switch uses McDATA OUI in the WWN

• For configuration download:

• When downloaded config file has different interoperability mode from what switch has, the

download process will check compatibility on the allergy fields, such as Admin Domain,

SCC/DCC policy, domain ID and zoning.

• Incompatible fields affect the download and Web Tools will issue error messages.

• Domain ID only accepts 1-31

When you turn on McDATA Open Fabric Mode, the following features are not available:

• The FICON CUP tab in the Switch Administration window

• Virtual Channel under Configuration tab in the Switch Administration window

• Trunking Tab in the Switch Administration window

• Port level trunking enable/disable buttons