Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

78 Web Tools Administrator’s Guide
53-1000606-01
Viewing trunk group information
6
FIGURE 38 Trunking tab
Viewing trunk group information
Use this procedure to display the following information about ISL Trunking groups:
• Trunk group number identifier
• Master port
• Member ports
1. Open the Switch Administration window as described on page 29.
2. Click the Trunking tab.
3. Optional: Click Refresh to refresh the information.
Disabling or reenabling trunking mode on a port
When the trunking license is activated, trunks are automatically established on eligible ISLs and
trunking capability is enabled by default on all ports. Use the following procedure to disable
trunking on a port or to reenable trunking if it has been disabled.
Trunking is not supported on logical ports, GbE ports, or EX_Ports.