HP StorageWorks Fabric OS 5.0.0 Advanced Web Tools User Guide (AA-RW1RA-TE, May 2005)

110 Zone administration
4. Click Device Accessibility.
The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box opens.
5. Select devices you want displayed in the accessibility matrix; click the radio button to select all devices
in the fabric or to select a subset of the devices.
If you select a subset, you must click the devices from the Select Devices list and click Add to move them
to the Evaluate for Accessibility list.
6. Click OK.
The Initiator/Target Accessibility Matrix appears. You can “mouse over” a target to display the symbolic
name of the device. You can click a WWN to launch the device view for that device. In addition, you can
right-click the device nodes and select View Device Detail to display detailed information about the
selected device.
Figure 36 Initiator/Target Accessibility Matrix
Managing the zoning database
This section contains the following procedures for managing the zoning database:
• Adding a WWN to multiple aliases, zones, and FA zones, page 111
• Removing a WWN from multiple aliases, zones, and FA zones, page 111
• Replacing a WWN in multiple aliases, FA zones, and zones, page 111
• Searching for a zone member, page 112
• Clearing the zoning database, page 112