HP StorageWorks Fabric OS 5.0.0 Advanced Web Tools User Guide (AA-RW1RA-TE, May 2005)

136 Fabric Watch administration
2. Click the Switch tab.
3. Enter your primary domain Name Server IP address in the DNS Server 1 field in the Email
Configuration area (see Figure 48).
4. Enter your secondary domain server IP address in the DNS Server 2 field.
5. Enter the domain name in the Domain Name field (between 4 and 32 characters).
6. Click Apply to save the changes.
Configuring the e-mail alert recipient
You can set a different e-mail alert configuration for each class. For example, you can set one e-mail
notification for SFPs and another for E_Ports. Before configuring e-mail alert recipients, you must set up the
e-mail notification recipient’s DNS server and domain name. For more information, see ”Configuring the
e-mail server on a switch” on page 135.
Figure 48 Fabric Watch e-mail configuration
To configure the Email Alert alarm:
1. Launch the Fabric Watch module as described in ”To launch the Fabric Watch module:” on
page 130.
2. Click the Email Configuration tab.
3. Select the Enable or Disable radio button to enable or disable the e-mail alert status.
When you disable e-mail alerts, Fabric Watch does not send e-mail notification even if the e-mail
notification method is assigned to monitored areas.
4. Type the e-mail address of the recipient in the Recipient Email Address text box.
Messages are sent to this address when e-mail notification is enabled.