HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

114 Fabric OS commands
Displays system configuration settings.
Synopsis
configshow [“filter“]
Availability
all users
Description
Use this command to view the system configuration settings set by the configure command.
Operands
This command has the following optional operand:
f
Examples
To display system configuration settings:
NOTE: Not all values displayed are applicable to all system models and configurations.
configShow
filter Specify a text string, in quotation marks, that limits the output of
the command to only those entries that contain the text string.
switch:admin> configshow
diag.postDisable: 0
fabric.domain: 1
fabric.ops.BBCredit: 16
fabric.ops.E_D_TOV: 2000
fabric.ops.R_A_TOV: 10000
fabric.ops.dataFieldSize: 2112
fabric.ops.max_hops: 7
fabric.ops.mode.fcpProbeDisable: 0
fabric.ops.mode.isolate: 0
fabric.ops.mode.pidFormat:1
fabric.ops.mode.tachyonCompat: 0
fabric.ops.mode.unicastOnly: 0
fabric.ops.mode.useCsCtl: 0
fabric.ops.mode.vcEncode: 0
fabric.ops.vc.class.2: 2
fabric.ops.vc.class.3: 3
fabric.ops.vc.config: 0xc0
(continued on next page)