HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 143
Sets the ESD skip-ports list.
Synopsis
diagesdports [itemlist | -show]
Availability
admin
Description
Use this command to set the ESD idle ports list. The list is saved in flash memory and stays in that mode
until the next execution of diagEsdPorts.
ESD idle ports are used by several of the functional test methods to disable testing on the specified list of
ports when ESD mode is enabled (refer to diagsetesdmode). The exact type of port list and the exact
use of this list are determined by each test method.
The mode becomes active as soon as this command is executed; it does not require a reboot to take effect.
Operands
This command has the following operands:
Examples
To display the ESD Idle Ports list:
See also
itemList
diagEsdPorts
itemlist Specifies the range of ports to be set to ESD Idle. Refer to
itemList for proper syntax. Enclose space-separated list in
quotation marks, such as “1-3 5”.
-show Specifies this operand to display ESD Idle Ports list. This operand
is optional.
switch:admin> diagesdports -show
ESD Idle Port list is 1-8.