HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

146 Fabric OS commands
Sets the diagnostics loop ID.
Synopsis
diagloopid [id | -show]
Availability
admin
Description
Use this command to select the loop ID to be used by FL mode diagnostics. The value entered will be
converted from a loop ID to the corresponding AL_PA and used as the port address for any diagnostics
that operate in FL_Port mode.
The mode becomes active as soon as this command is executed; it does not require a reboot to take effect.
The actual behavior of diagLoopId depends on the test methods that use it.
NOTE: Currently, no FL mode tests exist.
Operands
This command has the following optional operands:
If no operand is specified, the current value is displayed.
Examples
To display the loop ID:
Notes
Currently, no FL_Port mode tests exist.
diagLoopId
id Specify the loop ID for FL_Port mode diagnostics.
-show Specify -show to display the current loop ID.
switch:admin> diagloopid -show
FL mode Loop ID is 125.