HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 155
Displays diagnostics status.
Synopsis
diagshow [--slot number][-uports itemlist][-bports itemlist][-use_bports
value]
Availability
all users
Description
Use this command to display the diagnostics status for the specified list of blade or user ports.
Operands
This command has the following operands:
Examples
To display diagnostic status on a switch blade:
See also
itemList
diagShow
-slot number Specify which slot to operate on. If this option is not specified,
the default slot 0 is used. The default slot is designed to operate
on fixed-port-count products. By default, this command displays
all user ports in the system.
-uports itemlist Specify a list of user ports to display. This operand is optional.
-bports itemlist Specify a list of blade ports to display. This operand is optional.
-use_bports value If this value is not 0 the diagnostics status for the blade ports
specified in -use_bports displays; otherwise, the user ports
specified in -uports displays. The default value is 0. This
operand is optional.
switch:admin> diagshow
Diagnostics Status: Fri Feb 08 15:25:24 2002
Slot: 1 UPORTS
Port BPort Diag Active Speed ......
0 15 OK UP 2G Auto ......
1 14 OK UP 2G Auto ......
2 13 OK UP 2G Auto ......
3 12 OK UP 2G Auto ......
4 31 OK UP 2G Auto ......
5 30 OK UP 2G Auto ......
6 29 OK UP 2G Auto ......
7 28 OK UP 2G Auto ......
8 47 OK UP 2G Auto ......
(output truncated)