HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

158 Fabric OS commands
Enables or disables diagnostics skip test flags.
Synopsis
diagskiptests [value | -show]
Availability
admin
Description
Use this command to enable or disable the diagnostics skip test flags. The skip test flags are saved in flash
memory and stay set until the next execution of diagSkipTests.
The mode becomes active as soon as this command is executed. It does not require a reboot to take effect.
The skip test flags are used to skip the execution of certain POSTs that might prove hazardous to normal
switch operation. The exact use of this flag is determined by the POST scripts and the specific test methods
used.
Operands
This command has the following operands:
If no operand is specified, the current value is displayed.
Examples
To display the current skip test flags:
diagSkipTests
value Specify a bit mask for tests to skip.
-show If specified or no value is given, the current skip test flags
displays.
switch:admin> diagskiptests -show
Skip tests is 1.