HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 161
Disables the dynamic load sharing (DLS) option.
Synopsis
dlsreset
Availability
admin
Description
Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full description of
load sharing.
NOTE: This command should be used only if devices connected to the fabric cannot handle occasional
routing changes correctly.
DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing
policies.
Operands
none
Examples
To disable the dynamic load sharing option:
See also
aptPolicy
dlsSet
dlsShow
dlsReset
switch:admin> dlsreset
Committing configuration...done.
switch:admin> dlsshow
DLS is not set