HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

168 Fabric OS commands
Sets the error log start and end delimiter for messages pushed to the console.
Synopsis
errdelimiterset [-s “start delimiter string“] [-e “end delimiter string“]
Availability
admin
Description
Use this command to set the error log start and end delimiter for log messages pushed to the console. A
colon ( : ) is automatically applied to the end of the start delimiter and the beginning of the end delimiter.
An empty string clears the start and the end delimiters (including the colon) so that they are not displayed.
If no arguments are supplied to the command, it instead displays the existing errDelimiterSet
configuration. These delimiters are stored persistently.
Operands
This command has the following optional operands:
Examples
To display the start and end delimiter:
To change the start and end delimiter (sample output):
See also
errDump
errFilterSet
errShow
errDelimiterSet
-s start delimiter string Specifies the alphanumeric string for the start delimiter;
up to 10 characters are allowed.
-e end delimiter string Specifies the alphanumeric string for the end delimiter;
up to 10 characters are allowed.
switch:admin> errdelimiterset
delimiter start string: <none>
delimiter end string: <none>
switch:admin> errdelimiterset -s "Start" -e "End"
Start:2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name
Server received an invalid request from device 10:02:32:A3:78:23:23:End