HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

182 Fabric OS commands
Displays fabric membership information.
Synopsis
fabricshow
Availability
all users
Description
Use this command to display information about switches in the fabric.
If the switch is initializing or disabled, the message no fabric is displayed. If the fabric is reconfiguring,
some or all switches might not display; otherwise, the following fields display:
Operands
none
Examples
The following example illustrates a fabric of four switches. “sw180” is the principal switch. Three of the
switches are configured to run IP over Fibre Channel.
See also
switchShow
fabricShow
Switch ID The switch Domain_ID and embedded port D_ID
World Wide Name The switch WWN
Enet IP Addr The switch Ethernet IP address
FC IP Addr The switch FC IP address
Name The switch symbolic name. An arrow (>) indicates the principal
switch.
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
64: fffc40 10:00:00:60:69:00:06:56 192.168.64.59 192.168.65.59 "sw5"
65: fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180 >"sw180"
66: fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60"
67: fffc43 10:00:00:60:69:10:60:1f 192.168.64.187 0.0.0.0 "sw187"
The Fabric has 4 switches