HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

190 Fabric OS commands
Disables a fan unit.
Synopsis
fandisable unit
Availability
admin
Description
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTE: This command is not available on nonbladed systems excpet for the HP StorageWorks SAN
Switch 4/32.
Operands
This command has the following operand:
Examples
To disable a fan unit:
See also
fanEnable
fanShow
fanDisable
unit Specify the fan's unit number. View the fan unit numbers using
the fanShow command. This operand is required.
switch:admin> fandisable 1
Fan unit 1 has been disabled