HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 191
Enables a fan unit.
Synopsis
fanenable unit
Availability
admin
Description
Use this command to return the fan unit to the default RPM speed (only if the fan unit has been previously
disabled using the fanDisable command).
NOTE: This command is not available on nonbladed systems except for the StorageWorks SAN Switch
4/32.
Operands
This command has the following operand:
Examples
To enable a fan that has been disabled:
See also
fanDisable
fanShow
fanEnable
unit Specify the fan's unit number. View the fan unit numbers using
the fanShow command. This operand is required.
switch:admin> fanenable 1
Fan unit 1 has been enabled