HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

198 Fabric OS commands

Deletes a Fabric Assist zone.

Synopsis

fazonedelete “fazonename”

Availability

admin

Description

Use this command to delete an existing Fabric Assist mode zone on a fabric.

This command does not change the defined configuration (which you can view using the cfgShow

command) until the cfgSave command is issued. For the change to become effective, an appropriate

Fabric Assist zone configuration must be enabled using the cfgEnable command. For the change to be

preserved across switch reboots, it must be saved to flash memory using the cfgSave command.

NOTE: When security is enabled, this command can be issued only from the primary FCS switch.

Operands

The following operand is required:

Examples

To delete a Fabric Assist zone: