HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 213
Tests frame filters.
Synopsis
filtertest [-passcnt passcnt][-txports itemlist][-scamoff offset][-dcamoff
offset][-fdefoff offset]
Availability
admin
Description
Use this command to verify the ASIC frame level filtering logic including every type of filter actions:
This command can be run on every port and send the frame in internal loopback mode. The filter test
requires two different ports in the same quadrant because the filter logic in the transmitter port cannot
work if the frame is sent directory from the embedded port.
In this test, the filter definition covers the different filtering conditions, shown in Table 12.
filterTest
FLTACT_LIST_A Action to handle the subgroup A-based filtering.
FLTACT_LIST_B Action to handle the subgroup B-based filtering.
FLTACT_FROZEN Action to handle the frame frozen process.
FLTACT_DISCARD Action to discard frame.
FLTACT_FORWARD Action to forward frame.
Table 12 List of filter test numbers, definitions, and action types
Number Filter definition Action type
0 unconditional match Forward
1 unconditional match List A
2 unconditional match List B
3 unconditional match Frozen
4 unconditional match Discard
5 SCAM no match and AL_PA match List A
6 SCAM&DCAM match and AL_PA match List A
7 Zone A match and AL_PA match List A
8 Zone B match and AL_PA match List B
9 Zone A&B match and AL_PA match List B
10 Zone A|B match and AL_PA match Frozen
11 Zone A|B match and AL_PA match Discard