HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

222 Fabric OS commands

Restores the former active firmware image.

Synopsis

firmwarerestore

Availability

admin

Description

Use this command to restore the former active firmware image. This command can only be run if

autocommit was disabled during the firmwareDownload.

After a firmwareDownload and a reboot (with autocommit disabled), the downloaded firmware

becomes active. If you then do not want to commit the firmware and want to restore the former firmware,

run firmwareRestore. After running firmwareRestore, you can run firmwareDownload again.

This command reboots the system and makes the former firmware active. After reboot, both primary and

secondary partitions restore to the former firmware.

This command only takes action if the system is booted after a firmwareDownload; otherwise, it returns

with an error code.

Operands

none

Examples

To restore the former active firmware image: