HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 225
Operands
This command has the following optional operands:
Examples
To run fportTest on a switch:
Diagnostics
The following are possible error messages if failures are detected:
DATA
INIT
PORT_DIED
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
ERR_STAT_BADOS
ERR_STAT_C3DISC
ERR_STAT_CRC
-nframes count Specify the number of times (or number of frames per port) to
execute this test. If count is omitted, the default of 10 is used.
-ports itemlist Specify the ports to test. If itemlist is omitted, the test is executed
on all online F_Ports in the specified slot.
-seed payload_pattern Specify the pattern of the test packets payload. When
payload_pattern is set to 0, all seven data types are used.
-width pattern_width Specify the width of the pattern that the user specified. When
payload_pattern is set to 0x00, pattern_width is
ignored. Valid values are:
1byte
2word
4quad
-size pattern_size Specify the number of words in the test packet payload. If
pattern_size is omitted, the default value is 512.
switch:admin> fporttest -ports 1/0-1/15
Running fPortTest .......
Test Complete: "fporttest" Pass 10 of 10
Duration 0 hr, 0 min & 1 sec (0:0:0:127).
passed.