HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 227
Interactive interface to replace a field replaceable unit (FRU).
Synopsis
frureplace FRU
Availability
admin
Description
Use this command to guide the user in replacing a FRU. The command automatically performs the
necessary backup and restore (steps to accommodate the replacement).
Operands
This the following operand is required:
Examples
To replace the World Wide Name card:
fruReplace
FRU Specify the type of hardware component being replaced. WWN is
the only supported value; it specifies the replacement of the
WWN card.
switch:admin> frureplace wwn
This is the WWN card hot swap interface.
Continuing from this point will require
the whole process to be completed.
If this process is not complete due to a
power cycle, or CP failover, please follow
the recovery procedure in
Core Switch WWN Card Removal and
Replacement document.
Do you wish to continue [y/n]? y
Backing up WWN card data, please
wait about 25 seconds for further
instruction.
Please install the new FRU now.
(continued on next page)