HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 247
Displays the port information for specified user ports.
Synopsis
fwportdetailshow [--p portNumber] | [--s portState]
Availability
all users
NOTE: This command requires a Fabric Watch license.
Description
Use this command to print the overall status of the ports specified. The overall status is calculated based on
the following contributors:
Operands
If no operand is specified, all ports are displayed.
This command has the following operands:
fwPortDetailShow
Port Errors
LFA Number of link loss occurrences exceeded limit for time period
LSY Number of sync loss occurrences exceeded limit for time period
LSI Number of signal loss occurrences exceeded limit for time period
PER Number of protocol errors exceeded limit for time period
INW Number of invalid words exceeded limit for time period
CRC Number of invalid CRC errors exceeded limit for time period
PSC Port hardware state changed too often
BLP Buffer limit port
SFP Errors
STM SFP temperature is out of specification
SRX SFP receive power is out of specification
STX SFP transmit power is out of specification
SCU SFP current is out of specification
SVO SFP voltage is out of specification
The overall status can be in one of the followings:
Healthy Every contributor is healthy
Marginal One or more contributors are in this status
Faulty Faulty hardware
Offline Port has no connectivity or is disabled
If the overall status is not healthy, the contributing factors also are listed.
--p portNumber Yields a port detail report for a specific port.