HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

278 Fabric OS commands
Displays the link operating mode for a network interface.
Synopsis
ifmodeshow [interface]
Availability
all users
Description
Use this command to display the link operating mode for a network interface.
Operands
This command has the following operand:
Examples
To display the link operating mode for the eth0 Ethernet interface:
See also
ifModeSet
ifModeShow
interface Specify the name of the interface. You might specify the name
with quotation marks, but using them is not required. For
example, you can use either eth0 or “eth0”, where eth is the
network interface and 0 is the physical unit.
switch:admin> ifmodeshow eth0
Link mode: negotiated 100baseTx-HD, link ok