HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

280 Fabric OS commands
nghbCap Neighbor capabilities. Should be 0.
nghbId Domain ID of the neighbor (adjacent) switch.
idbNo IDB number. Should be equal to port_number.
remPort Port number on the remote switch connected to this port.
nflags Internal FSPF flags.
initCount Number of times this neighbor was initialized without the
interface going down.
lastInit Time the last initializing state, NB_ST_INIT, on this interface.
firstHlo Time the first hello sent on this interface.
nbstFull Time the last finishing state, NB_ST_FULL, on this interface.
&dbRetransList Pointer to the database retransmission list.
&lsrRetransList Pointer to the Link State Records (LSR) retransmission list.
&lsrAckList Pointer to the Link State Acknowledgements (LSA) retransmission
list.
inactTID Inactivity timer ID.
helloTID Hello timer ID.
dbRtxTID Database retransmission timer ID.
lsrRtxTID LSR retransmission timer ID.
inactTo Inactivity timeout value, in milliseconds. When this timeout
expires, the adjacency with the neighbor switch is broken and
new paths are computed to all possible destination switches in
the fabric.
helloTo Hello timeout value, in milliseconds. When this timeout expires,
a Hello frame is sent to the neighbor switch through this port.
rXmitTo Retransmission timeout value, in milliseconds. It is used to
transmit topology information to the neighbor switch. If no
acknowledgement is received within this value, the frame is
retransmitted.
nCmdAcc Total number of commands accepted from the neighbor switch.
Number includes Hellos, Link State Updates (LSU), and LSAs.
nInvCmd Number of invalid commands received from the neighbor switch.
Usually commands with an FSPF version number higher than the
one running on the local switch.
nHloIn Number of Hello frames received from the neighbor switch.
nInvHlo Number of invalid Hello frames (Hello frames with invalid
parameters) received from the neighbor switch.
nLsuIn Number of LSUs received from the neighbor switch.
nLsaIn Number of LSAs received from the neighbor switch.
attHloOut Number of attempted transmissions of Hello frames to the
neighbor switch.
nHloOut Number of Hello frames transmitted to the neighbor switch.
attLsuOut Number of attempted transmissions of LSUs to the neighbor
switch.
nLsuOut Number of LSUs transmitted to the neighbor switch.
attLsaOut Number of attempted transmissions of LSAs to the neighbor
switch.
nLsaOut Number of LSAs transmitted to the neighbor switch.