HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 281
Operands
This command has the following operands:
When no slot number and port number are specified, this command displays the interface information for
all ports on the switch (including non-E_Ports).
Examples
To display FSPF interface information:
slotnumber Specify the slot number for a Core Switch 2/64 or SAN Director
2/128. For all other switches, this operand is not required. The
slot number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot number (1
through 4 or 7 through 10) and port number (0 through 15).
The Core Switch 2/64 and SAN Director 2/128 have a total of
10 slots. Slot numbers 5 and 6 are control processor cards; slots
1 through 4 and 7 through 10 are port cards. On each port
card, there are 16 ports, counted from the bottom, numbered 0
to 15.
portnumber Specify a port number. Valid values for port number vary,
depending on the switch type. This operand is optional.
switch:user> interfaceshow 1/4
idbP = 0x1008b3d0
Interface 4 data structure:
nghbP = 0x1008c668
ifNo = 4
masterPort = 4 (self)
defaultCost = 500
cost = 500
delay = 1
lastScn = 16
lastScnTime = Apr 02 20:01:44.458
upCount = 2
lastUpTime = Apr 02 20:01:44.458
downCount = 1
lastDownTime = Apr 02 20:01:09.050
downReason = 2
iState = UP
Neighbor 4 data structure:
(continued on next page)