HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 309
Displays the Fabric Shortest Path First (FSPF) link state database.
Synopsis
lsdbshow [domain]
Availability
all users
Description
Use this command to display an FSPF link state database record for switches in the fabric, or one domain
within it.
There are two types of database entries:
• The link state database entry, which is permanently allocated.
• The link state record (LSR), which is allocated when a switch is connected to the fabric.
The LSR describes the links between connected domains in a fabric. For a link to be reported in the LSR,
the neighbor for that link must be in NB_ST_FULL state.
This command displays the content of both types of database entries, if both are present.
The fields described in Table 17 display.
LSDbShow
Table 17 lsdbShow display fields
Field Description
Domain Domain number described by this LSR. A (self) keyword after the
domain number indicates that LSR describes the local switch.
lsrP Pointer to LSR.
earlyAccLSRs Number of LSRs accepted, even though they were not sufficiently
spaced apart.
ignoredLSRs Number of LSRs not accepted because they were not sufficiently
spaced apart.
lastIgnored Last time an LSR was ignored.
installTime Time this LSR was installed in the database, in seconds since boot.
lseFlags Internal variable.
uOutIfs Internal variable
uPathCost Internal variable.
uOldHopCount Internal variable.
uHopsFromRoot Internal variable.
mOutIfs Internal variable.