HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

338 Fabric OS commands
Resets FSPF interface counters.
Synopsis
nbrstatsclear [slotnumber/][portnumber]
Availability
admin
Description
Use this command to reset the counters of FSPF frames transmitted and received on each inter-switch link
(ISL) or a specific ISL. These counters display using the using the interfaceShow command.
Use this command without operands to reset counters on all interfaces.
Operands
This command has the following operands:
When this command is specified with no operand, the statistics are cleared for all interfaces.
Examples
To reset the counters on a port:
nbrStatsClear
slotnumber Specify the slot number for a Core Switch 2/64 or SAN Director 2/128.
For all other switches, this operand is not required. The slot number must
be followed by a slash ( / ) and the port number, so that each port is
represented by both slot number (1 through 4 or 7 through 10) and port
number (0 through 15).
The Core Switch 2/64 and SAN Director 2/128 have a total of 10 slots.
Slot numbers 5 and 6 are control processor cards; slots 1 through 4 and
7 through 10 are port cards. On each port card, there are 16 ports,
counted from the bottom, numbered 0 to 15.
portnumber Specify a port number. Valid values for port number vary, depending on
the switch type. This operand is optional.
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(continued on next page)