HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 355
Displays the information of all the online devices zoned with the given device.
Synopsis
nszonemember -a | -u | pid | wwn
Availability
all users
Description
Use this command to display information about all the online devices zoned with the given device. Issuing
this command without operands displays all online devices zoned with the given device. Each line of
output displays:
There might be additional lines if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
• FC4 supported
• IP address (node)
• IPA
• port and node symbolic name (local device only)
• fabric port name
• hard address and/or port IP address
Operands
This command has the following operands:
nsZoneMember
Type U for unknown, N for N_Port, NL for NL_Port
Pid The 24-bit Fibre Channel address
COS A list of classes of service supported by the device
PortName The device's port World Wide Name
NodeName The device's node World Wide Name
DeviceType The device’s type
-a Displays each local device’s online zoned device data, including the PID
and zone alias.
-u Displays all the unzoned devices in the entire fabric. The device data
displayed includes the device PID and zone alias.
pid | wwn Specifies the port ID or WWN, respectively, whose zoned devices are to
be viewed. This operand is required.