HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 403
Displays end-to-end performance monitor information on a port.
Synopsis
perfshoweemonitor [slotnumber/]portnumber [interval]
Availability
all users
NOTE: This command requires a Performance Monitor license.
This command is deprecated; use perfMonitorShow instead.
Description
Use this command to display end-to-end monitor information on a port.
Refer to perfMonitorShow for details regarding this command’s output.
Operands
This command has the following operands:
Optionally, a comma can separate the operands. A space is required to separate the operands even
when using commas.
perfShowEEMonitor
slotnumber For bladed systems only, this operand specifies the slot number
of the port on which the monitor is to be added, followed by a
slash (/).
portnumber Specifies the number of the port on which the monitor is to be
added, relative to its slot for bladed systems. Use switchShow
for a list of valid ports.
interval Specify an interval, in seconds (5 or more). Tx and Rx counts are
in the unit of byte when this operand is specified. This operand
is optional.