HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 405
Displays filter-based performance monitor information for a port.
Synopsis
perfshowfiltermonitor [slotnumber/]portnumber [interval]
Availability
all users
NOTE: This command requires a Performance Monitor license.
This command is deprecated; use perfMonitorShow instead.
Description
Use this command to display all the filter-based monitors defined on the specified port and the traffic count
values.
Refer to perfMonitorShow for details regarding this command’s output.
Operands
This command has the following operands:
Optionally, a comma can separate the operands. A space is required to separate the operands even
when using commas.
Examples
To display filter monitor traffic on a port at an interval of every 6 seconds:
perfShowFilterMonitor
slotnumber For bladed systems only, this operand specifies the slot number
of the port on which the monitor is to be added, followed by a
slash (/).
portnumber Specifies the number of the port on which the monitor is to be
added, relative to its slot for bladed systems. Use switchShow
for a list of valid ports.
interval Specify an interval, in seconds (5 or more). This operand is
optional.
switch:admin> perfshowfiltermonitor 2/5 6
perfshowfiltermonitor 21, 6
0 1 2 3 4 5 6
#Frames #CMDs #CMDs #Frames #Frames #CMDs #CMDs
---------------------------------------------------------------
0 0 0 0 0 0 0
26k 187 681 682 682 494 187
26k 177 711 710 710 534 176
26k 184 734 734 734 550 184
26k 182 649 649 649 467 182
26k 188 754 755 755 567 184
26k 183 716 716 717 534 183
26k 167 657 656 655 488 167
26k 179 749 749 749 570 179
(continued on next page)