HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

406 Fabric OS commands
To display filter monitor information on a port:
NOTE: If you do not specify an interval, the filter-based monitor frame count is displayed in 64-bit format
and is cumulative.
See also
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
26k 164 752 752 752 588 164
26k 190 700 700 700 510 190
26k 181 701 701 701 520 181
26k 200 750 750 751 550 201
26k 180 692 692 691 512 179
26k 179 696 696 696 517 179
26k 187 720 720 720 533 187
26k 200 722 722 722 522 200
26k 204 717 717 717 513 204
switch:admin> perfshowfiltermonitor 2/5
There are 7 filter-based monitors defined on port 21.
KEY ALIAS OWNER_APP OWNER_IP_ADDR FRAME_COUNT
-----------------------------------------------------------------
0 SCSI_Frame TELNET N/A 0x00000000002c2229
1 SCSI_WR TELNET N/A 0x000000000000464a
2 SCSI_RW TELNET N/A 0x000000000000fd8c
3 SCSI_RW WEB_TOOLS 192.168.169.40 0x0000000000007ba3
4 SCSI_RW WEB_TOOLS 192.168.169.190 0x0000000000004f0e
5 SCSI_RD WEB_TOOLS 192.168.169.40 0x0000000000002208
6 SCSI_WR WEB_TOOLS 192.168.169.40 0x000000000000033a