HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

412 Fabric OS commands
Displays the AL_PAs of a port.
Synopsis
portalpashow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display the AL_PAs present in a port. If the port is not an active L_Port or if it does not
have any AL_PA, this command displays an error.
Operands
This command has the following operands:
Examples
To display the AL_PAs of a port:
See also
switchShow
portAlpaShow
slotnumber Specify the slot number for a Core Switch 2/64 or SAN Director 2/128.
For all other switches, this operand is not required. The slot number must
be followed by a slash ( / ) and the port number, so that each port is
represented by both slot number (1 through 4 or 7 through 10) and port
number (0 through 15).
The Core Switch 2/64 and SAN Director 2/128 have a total of 10 slots.
Slot numbers 5 and 6 are control processor cards; slots 1 through 4 and
7 through 10 are port cards. On each port card, there are 16 ports,
counted from the bottom, numbered 0 to 15.
portnumber Specify a port number. Valid values for port number vary, depending on
the switch type. This operand is optional.
switch:user> portalpashow 4/14
AL_PA type AL_PA type AL_PA type
0xe2 public 0xe4 public