HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 433
Displays port configuration settings.
Synopsis
portcfgshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display the current configuration of all ports. If no operand is specified, all the port
configuration settings are displayed for that switch or for the Core Switch 2/64 logical switch.
The following configuration information displays:
portCfgShow
Speed mode Displays as 1G, 2G, or AN (when in auto speed negotiation
mode). This value is set by the portCfgSpeed command.
Trunk Port mode Displays as ON when port is set for trunking or blank (..) when
trunking is disabled on the port. This value is set by the
portCfgTrunkPort command.
Long Distance mode Displays as blank (..) when the mode is off, L1 when the link is
up to 50 km, or L2 when the link is up to 100 km, and also
supports LE, L0.5, and LD modes. This value is set by the
portCfgLongDistance command.
VC Link Init mode
(virtual channel)
Displays as blank (..) when the long-distance link initialization
option is turned off and (ON) when it is turned on for long
distance mode. This value is set by the
portCfgLongDistance command.
Locked L_Port mode Displays as ON when port is locked to L_Port only or blank (..)
when L_Port lock mode is disabled (and it behaves as a U_Port).
This value is set by the portCfgLPort command.
Locked G_Port mode Displays as ON when port is locked to G_Port only or blank (..)
when G_Port lock mode is disabled (and it behaves as a
U_Port). This value is set by the portCfgGPort command.
Disabled E_Port mode Displays as ON when port is not allowed to be an E_Port or blank
(..) when the port is allowed to function as an E_Port. This value
is set by the portCfgEPort command.
Mcast LoopBack mode Displays as blank (..) when mcast loopback mode is off, and
(ON) when mcast loopback mode is enabled. This value is set by
the portCfgMcastLoopback command.
ISL R_RDY Mode mode Displays as ON when the port has been R_RDY-mode enabled or
blank (..) when the port is allowed to function as an E_Port. This
value is set by the portCfgISLMode command.
Persistent Disable mode Displays as ON when the port is disabled across reboots or
power cycles or (..) when the port is allowed to function
normally. This value is set by the
portCfgPersistentDisable command.