HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 441
Displays port error summary.
Synopsis
porterrshow
Availability
all users
Description
Use this command to display an error summary for all ports. The display contains one output line per port
and shows error counters in ones, thousands (k), or millions (m).
The following fields are displayed:
Operands
none
Examples
To display error counters for ports on a switch:
portErrShow
frames tx Frames transmitted
frames rx Frames received
enc in Encoding errors inside frames
crc err Frames with CRC errors
too shrt Frames shorter than minimum
too long Frames longer than maximum
bad eof Frames with bad end-of-frame delimiters
enc out Encoding error outside of frames
disc c3 Class 3 frames discarded
link fail Link failures (LF1 or LF2 states)
loss sync Loss of synchronization
loss sig Loss of signal
frjt Frames rejected with F_RJT
fbsy Frames busied with F_BSY
switch:user> porterrshow
frames enc crc too too bad enc disc link loss loss frjt fbsy
tx rx in err shrt long eof out c3 fail sync sig
=====================================================================
0: 154 152 0 0 0 0 0 2.0m 0 1 2 0 0 0
1: 154 152 0 0 0 0 0 1.9m 0 1 2 0 0 0
(Continued on next page)