HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

448 Fabric OS commands
Displays the port log without page breaks.
Synopsis
portlogdump [count[, saved[, portid]]]
Availability
all users
Description
Use this command to display the port log, listing all entries in the log without page breaks. This command
displays the same information as portLogShow, but portLogShow prompts the user to press Enter
between each page.
If the port log is disabled, the following message displays as the first line. Refer to portLogClear
command for more information.
WARNING: port log is disabled
For a full explanation of the information displayed by this command, refer to the HP StorageWorks Fabric
OS 4.x procedures user guide.
Operands
This command has the following operands:
Examples
To display the port log for a port:
portLogDump
count Specify the maximum number of lines to be displayed. Only the most
recent count entries are displayed. This operand is optional.
saved Specify a nonzero value to display the saved port log from the last switch
fault. Refer to upTime for conditions that cause a fault. The operand
count is ignored when displaying the saved log. This operand is
optional.
portid Specify the port to display. All other ports will not be displayed. This
operand is optional.
switch:user> portLogDump 20
time task event port cmd args
------------------------------------------------------
08:35:27.899 tShell pstate 14 OL1
08:35:27.899 tReceive pstate 14 LR2
08:35:27.916 tReceive pstate 14 AC
08:35:28.416 interrupt scn 14 1
08:35:28.433 tFabric ioctl 14 90 101d9910,0
08:35:28.433 tFabric Tx 14 164 02fffffd,00fffffd,0005ffff,10000000
08:35:28.433 tReceive Rx 14 0 c0fffffd,00fffffd,00050006
08:35:28.433 tReceive Rx 14 164 03fffffd,00fffffd,00050006,02000000
08:35:28.433 tTransmit Tx 14 0 c0fffffd,00fffffd,00050006
08:35:28.433 tFabric ioctl 14 91 103646d8,0
(continued on next page)