HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

450 Fabric OS commands
Displays the port log of specified port, without page breaks.
Synopsis
portlogdumpport portid
Availability
all users
Description
Use this command to display the port log of specified port. The command displays all entries in the log
without any page breaks. It is identical to portLogShowPort, except that portLogShowPort prompts
the user to press Enter between each page.
Port logs are circular log files in the switch firmware, which can save up to 8,192 entries. Refer to
portLogConfigShow to display the current port log size. Once the log is full, the newest log entries
delete the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some
device-to-device1, and control information
If the port log is disabled, the following message displays as the first line. Refer to portLogClear
command for more information.
WARNING: port log is disabled
Refer to the HP StorageWorks Fabric OS 4.x procedures user guide for more information.
Operands
This command has the following operand:
Examples
To display the port log dump for a port:
portLogDumpPort
portid Specify the area number of port to display. If a port area number is
specified, all other ports on the switch are ignored. This operand is
optional.
switch:user> portLogDumpPort 14
time task event port cmd args
------------------------------------------------------
08:35:27.899 tShell pstate 14 OL1
08:35:27.899 tReceive pstate 14 LR2
08:35:27.916 tReceive pstate 14 AC
08:35:28.416 interrupt scn 14 1
08:35:28.433 tFabric ioctl 14 90 101d9910,0
08:35:28.433 tFabric Tx 14 164 02fffffd,00fffffd,0005ffff,10000000
08:35:28.433 tReceive Rx 14 0 c0fffffd,00fffffd,00050006
08:35:28.433 tReceive Rx 14 164 03fffffd,00fffffd,00050006,02000000
08:35:28.433 tTransmit Tx 14 0 c0fffffd,00fffffd,00050006
(continued on next page)