HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

454 Fabric OS commands
Displays port login status.
Synopsis
portloginshow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display port login received from devices attached to the specified port. Some
information varies with the switch model and port type. The following lines display:
There is further information about the login after the above columns. This can include the DID (destination
identifier) that the port is logged on to.
Operands
This command has the following operands:
portLoginShow
Type Type of login:
fe FLOGI, fabric login to fabric F_Port.
ff PLOGI, process login to specific N_Ports or well-known address,
such as name server.
fd FDISC, virtual N_Port login.
PID The port's 24-bit D_ID.
WWN The port's World Wide Name.
credit The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for
FLOGIs and EE (end-to-end) credit for PLOGIs.
df_sz The default frame size for this login.
cos Class of services supported. This can be a combination of the following
bits:
4 Class of service includes class 2.
8 Class of service includes class 3.
slotnumber Specify the slot number for a Core Switch 2/64 or SAN Director
2/128. For all other switches, this operand is not required. The
slot number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot number (1
through 4 or 7 through 10) and port number (0 through 15).
The Core Switch 2/64 or SAN Director 2/128 have a total of
10 slots. Slot numbers 5 and 6 are control processor cards; slots
1 through 4 and 7 through 10 are port cards. On each port
card, there are 16 ports, counted from the bottom, numbered 0
to 15.
portnumber Specify a port number. Valid values for port number vary,
depending on the switch type.