HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

498 Fabric OS commands
Displays information from portTest.
Synopsis
porttestshow [-ports itemlist]
Availability
admin
Description
Use this command to display a snapshot of information from portTest. The following information
displays:
1. Pass/Fail information on a given port.
2. Port type tested.
3. Current State of portTest (NO TEST, TESTING, or TEST DONE).
4. Type of ports asked to test (ALL_PORTS, ALL_E_PORTS, ALL_L_PORTS, ALL_F_PORTS, ALL_LB_PORTS, or
SINGLE_PORT).
5. Pattern used in testing.
6. Seed used in testing.
7. User Delay value.
8. Total iteration asked to test.
9. Current test iteration.
10.Total Fails on this test.
11.Consecutive Fails on this test.
12.portTest Start Time.
13.portTest Stop Time.
14.Timeout value.
15.Error code if any.
Operands
This command has the following optional operands:
portTestShow
-ports itemlist Specify a list of user ports to test. By default, all the user ports in
the current slot will be assumed. Refer to itemList help pages
for further details.