HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

506 Fabric OS commands
Adds a member to a QuickLoop.
Synopsis
qloopadd “qloopname“, “member;member“
Availability
admin
NOTE: This command requires an HP Advanced Zoning license.
Description
Use this command to add one or more members to an existing QuickLoop.
When a configuration is enabled, all QuickLoops defined in the configuration must resolve to one or two
switch worldwide names.
Zone alias names entered as members of this QuickLoop must be defined with WWNs. Zone alias names
that are defined by domain and port number, or AL_PA are not accepted as members of the QuickLoop.
NOTE: When security is enabled, this command can only be issued from the primary FCS switch.
Use this command only with v3.x systems in the fabric; QuickLoop is not supported in v4.x.
Operands
The following operands are required:
Examples
To add an alias for a second WWN to “qlp1”:
See also
qloopCreate
qloopDelete
qloopRemove
qloopShow
qloopAdd
qloopname Specify the name of QuickLoop, in quotation marks.
member Specify a list of QuickLoop members, in quotation marks,
separated by semicolons. Include one or more of the following:
World Wide Names
Zone alias names
switch:admin> qloopAdd "qlp1", "wwn2"