HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

54 Fabric OS commands
Examples
To test backplane connections on a Core Switch 2/64 or SAN Director 2/128:
Diagnostics
When this command detects failure(s), the subtest might report one or more of the following error
messages:
DATA
TIMEOUT
XMIT
Refer to the HP StorageWorks Fabric OS 4.x diagnostics and system error messages reference guide for
more information.
See also
itemList
8word ramp
9 quad ramp
10 byte lfsr
11 random
12 crpat
13 cspat
14 chalf sq
15 cqtr sq
16 rdram pat
17 jCRPAT (default)
18 jCJTPAT
19 jCSPAT
-ports itemlist Specifies a list of blade ports to test. By default, all the blade ports in the
specified slot are used. Refer to itemList help pages for further details
-verbose mode Specifies verbose mode. If specified with a nonzero value, this mode
displays the test progress in detail. The default value is to disable the mode.
This operand is optional.
switch:admin> backplanetest -ports 1/16, 18, 20 -payload 2048 -verbose 1
Running backplanetest ..............
Test frame info for Backplane Connection Test:
# of frames: 1
sid data: 0xfffffd
did data: 0xfffffd
payload size: 2048 bytes
Test Complete: backplanetest Pass 1 of 1
Duration 0 hr, 0 min & 1 sec (0:0:1:715).
passed.