HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

542 Fabric OS commands

If no operand is specified, the session becomes interactive and the user is prompted to enter FCS switch

members and passwords.

If the -currentpwd option is not used, the session becomes interactive and the user is prompted to

enter new passwords for root, factory, admin, user, and non-FCS admin accounts.

Examples

To enable secure mode using --quickmode:

--quickmode This option is a shorthand notation for a combination of the

--currentpwd, --lockdown, and --fcs "*" options. On

successful execution of the command, security is enabled in the

fabric with all switches being FCS, all switches having passwords

identical to that of the primary FCS and SCC, and DCC policies

capturing and maintaining the current configuration of the fabric.

This option can be used only on a fabric with secure mode disabled

and only when the command is run on the switch specified as the

primary FCS switch.

fcsprimary:admin> secModeEnable --quickmode

Your use of the certificate-based security features of the software

installed on this equipment is subject to the End User License Agreement

provided with the equipment and the Certification Practices Statement,

which you may review at http://www.switchkeyactivation.com/cps. By

using

these security features, you are consenting to be bound by the terms of

these documents. If you do not agree to the terms of these documents,

promptly contact the entity from which you obtained this software and do

not use these security features.

Do you agree to these terms? (yes, y, no, n): [no] y

This command requires Switch Certificate, Security license and Zoning

license to be installed on every switch in the fabric.

PLEASE NOTE: On successful completion of this command, login sessions

may be closed and some switches may go through a reboot to form a secure

fabric.

Non-FCS admin password will be set the same as FCS admin password.

ARE YOU SURE (yes, y, no, n): [no] y

Please enter current admin account password:

Secure mode is enabled.