HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 543
To enable a security policy that includes three FCS switches specified by domain, WWN address, and
switch name:
fcsprimary:admin> secmodeenable
Your use of the certificate-based security features of the software
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification Practices Statement,
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of
these documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms? (yes, y, no, n): [no] y
This command requires Switch Certificate, Security license and Zoning
license to be installed on every switch in the fabric.
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
This is an interactive session to create a FCS list.
The new FCS list is empty.
Enter WWN, Domain, or switch name(Leave blank when done): 102
Switch WWN is 10:00:00:60:69:80:04:0f.
The new FCS list:
10:00:00:60:69:80:04:0f
Enter WWN, Domain, or switch name(Leave blank when done):
10:00:00:60:69:80:04:0e
Switch WWN is 10:00:00:60:69:80:04:0e.
The new FCS list:
10:00:00:60:69:80:04:0f
10:00:00:60:69:80:04:0e
(continued on next page)