HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 547
Sets the admin password for non-FCS switches.
Synopsis
secnonfcspasswd
Availability
admin
Description
Use this command to change the admin password on all non-FCS switches in the fabric. This command
can be issued only from the primary FCS switch in secure mode. The changed passwords are persistent
across reboots. All non-FCS switches that join the fabric in the future inherit this new password.
The password must be between 8 and 40 characters long and can consist of any combination of
alphanumeric characters.
NOTE: This command must be issued from a sectelnet or SSH session and can be issued only from the
primary FCS switch.
Make sure no users are logged in to the network when this command is executed, otherwise, users on
non-FCS switches sessions terminate.
Operands
none
Examples
To set the admin password for all non-FCS switches in the fabric:
See also
passwd
secModeDisable
secModeShow
secTempPasswdSet
secNonFcsPasswd
switch:admin> secnonfcspasswd
Changing password for admin
Non FCS switch admin password:
Re-type new password:
Login sessions with password changed will be terminated.
Password for non-FCS admin account has been changed successfully.