HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 549
Applies defined policy set to all switches in the fabric.
Synopsis
secpolicyactivate
Availability
admin
Description
Use this command to activate the current defined security policy to all switches in the fabric. After
activation, the defined policy set becomes the active policy set.
NOTE: This command can be issued only in secure mode and only from the primary FCS switch.
Operands
none
Examples
To activate the defined security policy set to all switches in the fabric:
See also
secPolicyAbort
secPolicyAdd
secPolicyCreate
secPolicyDelete
secPolicyDump
secPolicyRemove
secPolicySave
secStatsShow
secPolicyActivate
primaryfcs:admin> secpolicyactivate
About to overwrite the current Active data.
ARE YOU SURE (yes, y, no, n): [no] y
secpolicyactivate command was completed successfully.