HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

550 Fabric OS commands
Adds members to an existing policy.
Synopsis
secpolicyadd name, “member [; member...]“
Availability
admin
Description
Use this command to add members to an existing access policy. The new members must not already be
members within the policy or the command fails.
Each policy corresponds to a management method. The list of members of a policy acts as an access
control list for that management method. When security is first enabled using the command, only the
FCS_POLICY exists. Before a policy is created, there is no enforcement for that management method; all
access is granted. After a policy has been created and a member has been added to the policy, that
policy becomes closed to all access except from included members. If all members are then deleted from
the policy, all access is denied for that management access method (the DCC_POLICY is an exception).
NOTE: This command can be issued only in secure mode and only from the primary FCS switch.
secPolicyAdd