HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 565
Moves a member in the FCS policy.
Synopsis
secpolicyfcsmove [from, to]
Availability
admin
Description
Use this command to move an FCS member from one position to another in the FCS list. Only one FCS
can be moved at a time. The first FCS switch in the list that is also present in the fabric is the primary FCS.
If no parameters are specified, the command becomes interactive, prompting you to supply valid values
for the operands.
NOTE: This command can be issued only from secure mode and only from the primary FCS switch.
If a backup FCS is moved to the first position, it becomes the primary FCS after activation.
Operands
This command has the following operands:
If no operand is specified, the command becomes interactive and you are prompted for values.
secPolicyFCSMove
from Specify the position of the FCS switch you want to move.
to Specify the position to which you want to move the FCS switch.