HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 567
Removes members from an existing policy.
Synopsis
secpolicyremove name [, “member [;member]“
Availability
admin
Description
Use this command to remove members from an existing security policy. If a policy is empty after removing
all members, all accesses to the policy are disallowed (the DCC_POLICY and OPTIONS_POLICY are
exceptions). You cannot remove all members from FCS_POLICY, and you cannot remove the FCS members
from SCC_POLICY.
NOTE: This command can be issued only from secure mode and only from the primary FCS switch..
Operands
This command has the following operands:
secPolicyRemove
name Specify the name of an existing policy you want to remove members from. Valid values
for this operand are:DCC_POLICY_nnn
FCS_POLICY
TELNET_POLICY
HTTP_POLICY
API_POLICY
RSNMP_POLICY
WSNMP_POLICY
SES_POLICY (HP does not support SES_POLICY)
MS_POLICY
SERIAL_POLICY
FRONTPANEL_POLICY
SCC_POLICY
OPTIONS_POLICY
The specified policy name must be capitalized.
The DCC_POLICY policy name has the common prefix DCC_POLICY_ followed by a
string of user defined characters. These characters do not have to be capitalized like
regular policy names, but are case sensitive.This operand is required.