HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 579
Resets a temporary password on a remote switch.
Synopsis
sectemppasswdreset [domain[, “login_name”]]
Availability
admin
Description
Use this command to remove temporary passwords that were set up using secTempPasswdSet
command.
If a login name is not supplied, all passwords on the switch identified by the specified domain are
refreshed. If the domain is also not supplied, all temporary passwords for all login levels are removed from
every switch in the fabric.
Each switch has four accounts: root, factory, admin, and user. Root and factory accounts are disabled for
non-FCS switches. If they are temporarily activated by secTempPasswdSet, those accounts are disabled
by secTempPasswdReset or rebooting the switch.
NOTE: This command can be issued only from secure mode and only from the primary FCS switch.
Operands
This command has the following operands:
secTempPasswdReset
domain Specify the domain of the switch from which the temporary passwords
are to be removed. This operand is optional.
login_name Specify the name of the login account from which the temporary
password are removed. This operand is optional.